| Circuit | Custom one-chip of microprocessor LSI circuit. |
| Display | LCD size : 52 mm x 38 mm
LCD with green backlight ( ON/OFF ). |
| Measurement | Velocity, Acceleration, Displacement |
| Function | Acceleration, Velocity :
RMS, Peak, Max. Hold.
Displacement :
p-p ( peak-peak ), Max-hold p-p. |
| Unit | Measurement | Metric | Imperial |
| Acceleration | meter/s^2,G | ft/s^2, |
| Velocity | mm/s, cm/s | inch/s |
| Displacement | mm | inch |
| Frequency range | 10 Hz to 1 KHz
* Sensitivity relative during the
the frequency range meet ISO 2954 Refer to table 1, page . |
| Circuit | Exclusive microcomputer circuit. |
| Peak Measurement | Acceleration, Velocity :
To measure and update the peak value.
Displacement :
To measure and update the peak to peak ( p-p ) value. |
| Max. Hold Measurement | Acceleration, Velocity :
To measure and update the max. peak value. |
Displacement :
To measure and update the max. peak to peak ( p-p ) value. |
| Zero Button, Max. Hold Rest Button | Build in the Zero button and the Max. Hold reset button on front panel. |
| Datalogger Sampling Time Setting range | Auto | 1 second to 3600 seconds
@ Sampling time can set to 1 second, but memory data may loss. |
| Manual | Push the data logger button once will save data one time.
@ Set the sampling time to 0 second.
@ Manual mode, can also select the 1 to 99 position ( Location ) no. |
| Memory Card | SD memory card. 1 GB to 16 GB. |
| Advanced setting | Set clock time ( Year/Month/Date, Hour/Minute/ Second )
Decimal point of SD card setting
Auto power OFF management
Set beep Sound ON/OFF
Set sampling time
SD memory card Format |
| Data Hold | Freeze the display reading. |
| Memory Recall | Maximum & Minimum value. |
| Sampling Time of Display | Approx. 1 second. |
| Data Output | RS 232/USB PC computer interface.
Connect the optional RS232 cable UPCB-02 will get the RS232 plug.
Connect the optional USB cable USB-01 will get the USB plug. |
| Operating Temperature | 0 to 50 °C. |
| Operating Humidity | Less than 85% R.H. |
| Power Supply | * Alkaline or heavy duty DC 1.5 V battery ( UM3, AA ) x 6 PCs, or equivalent. |
| * DC 9V adapter input. ( AC/DC power adapter is optional ). |
會(huì)員1.png)
